表面效应对铁<100>间隙型位错环的影响

在材料辐照损伤过程中,间隙型位错环的形成及动力学行为严重影响材料在辐照条件下的服役行为.在常用的以体心立方铁为基的合金材料中,1/2<111>和<100>是两种主要的位错环,其对辐照损伤的影响一直都是核材料领域研究的热点之一.在之前的研究中,人们对{111}面与单个1/2<111>位错环的相互作用进行了深入研究,发现表面对位错环性质确实有重要的影响.采用分子动力学方法,在原子尺度详细研究了另一个重要的表面铁{100}面对<100>间隙型位错环动力学过程的影响.模拟发现位错环伯格斯矢量与表面法线方向的关系、距表面的深度、位错环之间的相互作用以及温度等,都对位错环与表面的相互作用产生重要影响,其中,表面作用下的伯格斯矢量的演化以及<100>位错环在此过程中的一维运动首次被发现.基于这些模拟结果,就<100>位错环对表面辐照损伤结构的影响进行详细地研究,给出<100>位错环对表面凹凸结构的贡献,这些结果为理解辐照过程中材料表面的演化提供一种可能的解释.     

The production of enantiomerically pure 1-phenylethanol by enzymatic kinetic resolution method using response surface methodology

As the enantiomers of 1-phenylethanol are valuable intermediates in several industries, the lipase catalyzed kinetic resolution of (R,S) -1-phenylethanol is a relevant research topic. In this study, the goal was to determine the optimum reaction parameters to produce enantiomerically pure 1-phenylethanol by lipase (Novozyme 435) catalyzed kinetic resolution using response surface methodology (RSM). Reactions were performed with 40–400 mM (R,S)-1-phenylethanol, 120–1200 mM vinyl acetate and 2–22 mg/mL biocatalyst concentrations (BC _L ), at 20–60 °C and with a stirring rate of 50–400 rpm for 5–120 min. The samples were analyzed using high performance liquid chromatography (HPLC) with a Chiralcel OB column. Optimum reaction parameters to reach 100% enantiomeric excess for the substrate ( ee _s ) were determined as follows: substrate concentration (C _s ): 240 mM, BC _L : 11 mg/mL, at 42 °C with a reaction time of 75 min. Model validation was performed using these conditions and ee _s was calculated as 100%, which indicates the predicted model was efficient and accurate. When compared to the literature, it was observed that the reaction time decreased significantly. This is an important result considering the industrial scale perspective.     

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束，在使用的振动环境中，会因弯曲应力而导致破裂，影响到飞行安全．本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究．首先在对8 mm、12 mm 无缺陷导管和含U 型缺口8 mm 导管的疲劳试验和有限元分析的基础上，得到了导管的最大拉应变-裂纹萌生寿命数据．然后采用基于强度极限和弹性模量估算法的Manson-Coffin 公式来预测导管裂纹萌生寿命．最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数，使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度．     

Luminescent Surface-Tethered Polymer Brush Materials

Surface-tethered polymers are unique molecular architectures that have been recently used in advanced sensors, electronics and biomedical applications. However, techniques for characterizing these materials in their surface-tethered form remain limited. The incorporation of luminescent functionality into these materials has enabled new characterization methods, while also unlocking new applications in optoelectronics, stenography and sensing. Micron-scale photolithography techniques have recently enabled the preparation of high-resolution patterns, as well as architectures with unique photophysical properties. Herein, we provide an overview of the techniques used to prepare luminescent polymer brush materials and their applications in stimuli-responsive sensors, cell adhesion materials, and optoelectronics. We also provide our perspective on the promising future uses of surface-tethered polymers, as well as the short-term challenges and opportunities in the field.     

Three-ligand Co-assembled 2D Au(I)-Thiolate Nanosheets

Two-dimensional (2D) Au(I)-thiolate assemblies are a special type of material that can balance high structural stability and rich surface functionality, which shows promising prospects in both fundamental research and applications. Co-assembly of multiple ligands is a facile way to further enrich the surface properties and functions, and expand their application potentials. In this work, taking 3-mercaptopropionic acid (MPA), cysteine (Cys) and 1-thioglycerol (TGO) as example ligands, we studied in detail the possibility to co-assemble them into one nanosheet. Although the three ligands have significantly different controllability and pathways when self-assembling individually with Au(I), they can still be effectively co-assembled by reacting with HAuCl₄ together to obtain three-ligand nanosheets with good colloidal stability. The key points for successful co-assembly are also revealed by comparing single- and three-ligand self-assembly processes, laying a solid foundation for co-assembly of even more ligands. The easy but powerful strategy for 2D materials with closely-packed and multiple tunable surface functional groups addresses the surface engineering problem for 2D materials and paves the way for their wider applications in sensing and biomaterials.     

The impact of insecticides containing deltamethrin and cyfluthrin on the composition of surface compounds in the larvae,females and males of Tenebrio molitor

This paper presents the effect of insecticides on the composition of the surface compounds of one of the most harmful insects, Tenebrio molitor, by analysis using GC–MS. As a result of the use of insecticides, the composition of the chemical compounds on the surface of insects changes, depending on the insecticides used. The most numerous groups of the marked compounds were fatty acids, alkanes, esters and sterols. The content of the identified compounds in the larvae increased at both 24 and 48 h after the application of insecticides, in comparison with the control samples. The content of identified compounds in the samples taken from the females increased 24, 48 and 72 h after the application of insecticides in comparison with the control samples. By contrast, in samples prepared from males, the content of identified compounds decreased 24 h after the application of insecticides, compared with the control samples. The highest content of chemical compounds was for fatty acids and alkanes after the use of insecticides. The content of fatty acids after the application of the insecticide with deltamethrin was 62.1 ± 3.3–466.9 ± 5.9 μg/g, and after the application of the insecticide with cyfluthrin was 49.9 ± 1.9–458.3 ± 4.2 μg/g. However, the content of alkanes after the use of deltamethrin was 115.6 ± 4.2–4672.0 ± 32.1 μg/g, and after the use of cyfluthrin was 189.4 ± 3.8–3975.0 ± 10.2 μg/g.     

Electrochemically Determining Electronic Structure of ZnO Quantum Dots with Different Surface Ligands

The electronic structure of quantum dots (QDs) including band edges and possible trap states is an important physical property for optoelectronic applications. The reliable determination of the energy levels of QDs remains a big challenge. Herein we employ cyclic voltammetry (CV) to determine the energy levels of three types of ZnO QDs with different surface ligands. Coupled with spectroscopic techniques, it is found that the onset potential of the first reductive wave is likely related to the conduction band edges while the first oxidative wave originates from the trap states. The determined specific energy levels in CV further demonstrates that the ZnO QDs without surface ligands mainly have oxygen interstitial defects whilst the ZnO QDs covered with ligands contain oxygen vacancies. The present electrochemical method offers a powerful and effective way to determine the energy levels of wide bandgap ZnO QDs, which will boost their device performance.     

Elucidating the Nature of the External Acid Sites of ZSM-5 Zeolites Using NMR Probe Molecules

The identification of acid and nonacid species at the external surface of zeolites remains a major challenge, in contrast to the extensively-studied internal acid sites. Here, it is shown that the synthesis of zeolite ZSM-5 samples with distinct particle sizes, combined with solid-state NMR and computational studies of trimethylphosphine oxide (TMPO) adsorption, provides insight into the chemical species on the external surface of the zeolite crystals. ¹H–³¹P HETCOR NMR spectra of TMPO-loaded zeolites exhibit a broad correlation peak at δ_P ∼35–55 ppm and δ_H ∼5–12 ppm assigned to external SiOH species. Pore-mouth Brønsted acid sites exhibit ³¹P and ¹H NMR resonances and adsorption energies close to those reported for internal acid sites interacting with TMPO. The presence of an external tricoordinate Al-Lewis site interacting strongly with TMPO is suggested, resulting in ³¹P resonances that overlap with the peaks usually ascribed to the interaction of TMPO with Brønsted sites.     

Surface Engineering of Conjugated Polybenzothiadiazoles and Integration with Cobalt Oxides for Photocatalytic Water Oxidation

Conjugated polymers feature promising structure and properties for photocatalytic water splitting. Herein, a hydrolysis strategy was demonstrated to rationally modulate the surface hydrophilicity and band structures of conjugated poly-benzothiadiazoles. High hydrophilicity not only enhances the dispersions of polymeric solids in an aqueous solution but also reduces the absorption energy of water molecules. Besides, both theoretical and experimental results reveal that a more positive valence band potential is generated, which contributes to enhancing the photocatalytic water oxidation performance. Accordingly, the surface-modified conjugated polymers show largely promoted photocatalytic water oxidation activities by deposition of cobalt oxides as cocatalysts.     

Diffraction of electromagnetic waves by a resistive half-plane in magneto-ionic plasma

The interaction of magnetic polarized electromagnetic wave with a resistive half-plane in magneto-ionic plasma is investigated. The method of transition boundary is used for the evaluation of the diffracted wave. The excitation of surface waves is examined in the medium and their diffracted fields are derived by using the diffraction theory for grazing incidence. The uniform field expressions are obtained with the aid of the uniform theory for evanescent waves. The behaviours of the derived scattered waves are studied numerically.